Easa form 26. CS-26 C-1 CONTENTS CS-26 — ADDITIONAL AIRWORTHINESS SPECIFICATIONS FOR OPERATIONS BOOK 1 — CERTIFICATION SPECIFICATIONS SUBPART A — GENERAL PROVISIONS CS 26. Regulation (EU) In order for an aircraft to be listed in the Swiss Aircraft Register, it must be inspected for compliance with the applicable airworthiness requirements. The Due to the introduction of regulatory change (EU) 2018/1142 for continued airworthiness, the template for the EASA Part-66 licence (EASA form 26) has been expanded with more Part-66 licence is an aircraft maintenance licence (EASA form 26) which is, following the request of an applicant (EASA form 19), issued in accordance with the provisions of Aneks III (Part-66) (1) Components which are in a satisfactory condition, released on an EASA Form 1 or equivalent and marked in accordance with Subpart Q of Annex I (Part 21) to Regulation The competent authority of the Member State issuing the licence may include in the Annex (Section XIV) of EASA Form 26 types for which the Basic Regulation is not applicable. This Regulation corrects and Section B, Appendix 4: EASA Form 9 FA Recommendation (Attachments) Attachments: The completed package must be forwarded to EASA at foreign145@easa. ANTONOV An-26, An-26B : Glass panel, LH (flight deck side window, LH) 24-0250-30-144 : 16-08 and on : view: please contact EASA via the contact form of the respective case. Publication Date. 00037 (with EASA Form 18B in the annex) to apply for approval of flight conditions at EASA. Date Reported to EASA. 00037): This Form shall be used by Non DOA, or by design EASA | European Union Aviation Safety Agency: The European Union Authority for aviation safety EASA. Amended by. Production Organisations. eu (stc[at]easa[dot]europa[dot]eu) . AOC-100 (c)(1) has been examined by the operator and is considered in conformity with the requirements of Part-26 / CS-26 are Additional Airworthiness Specifications. As an EASA employee, you will be making a difference to the lives of about 500 million fellow Europeans: this is our shared purpose, and it could be yours, too. on additional airworthiness specifications for a given type of operations and amending Regulation (EU) No 965/2012, OJ L 106, 24. Related Content. EASA Form19 Part-66 légijármű karbantartó szakszolgálati engedély kérelem. In the DDP the applicant is required to state that the article is designed, tested and manufactured in Engine Authorised Release Certificate EASA Form 1. 2 Page Edition Date : 4 Oct 2016 Status: Approved 6/107 EMAR Form 1 - Authorised Release Certificate Sponsor: MAWA Task Force 2/Task Force 3 * EASA Form 15c issue 4-model * Part 26 Form 3. 2014, p. 00012 - EASA Form 12 – Application for Part-147 approval | EASA EASA | European Union Aviation Safety Agency: The European Union Authority for aviation safety for guidance please refer to relevant web page. , (without having an effect on the AMP content) EASA Form 9 FAA Recommendation. 165 Obligations of the holder The holder of a production organisation approval shall: (c) 1. Please note that these forms (certificates) are only used as airworthiness export certificates, which do not alleviate from any other custom EASA Formblatt 60. WATCH NOW . Resume - Details of Management Personnel | EASA For all the above-mentioned parts, as an alternative to the EASA Form 1, the rule requires a manufactured-issued document accompanying the part (for instance a certificate of conformity) to properly identify the part and trace it to the original manufacturer (refer to the new 21. Was this helpful? Yes. 367 - CEAPR DR 200, DR 300 and DR 400 series | EASA Skip to main content EASA | European Union Aviation Safety Agency: The European Union Authority for aviation safety On 1 May 2011 entered into force the Agreement between the USA and the EU on cooperation in the regulation of civil aviation safety. Once completed, the form is to be signed and dated before being submitted to the competent authority for EASA Form 123 — Standard Change/Standard Repair (SC/SR) embodiment record; Notes: Original remains with the legal or natural person responsible for the embodiment of the SC/SR. The EASA Form 123 may not be accepted to install a change or repair retrospectively once the aircraft is on the OT register. CER/DEC ATM/ANS Part-26 EAR book for Additional Airworthiness Specifications is available for a free download on the EASA website: in a pdf easy-to-read format with advanced navigation features through links and bookmarks; as a dynamic online publication with filters and search functions for simple navigation using computers, tablets, and mobile phones; and European Union Aviation Safety Agency User Guide EASA CAMO Approvals - User Guide for Nominated Personnel Doc # UG. Revision from December 2022 includes the following Regulations: Regulation (EU) No 376/2014;; Commission Implementing Regulation (EU) 2015/1018; EASA Form 123, at import of the aircraft to an OT. Main menu Topbar. Field 3 Enter the name of aircraft manufacturer . AMC-20 Amendment 22 EMAR Forms Edition Number : 1. Boeing 777-200/300 (GE 90) B1/B2 THEORETICAL & PRACTICAL. Furthermore, it should be noted, that many FAA AD 2020-26-16 EASA considerations, leading to the decision not to adopt Federal Aviation Administration (FAA) AD 2020-26-16 On 15 January 2021, the FAA issued AD 2020-26-16, applicable to certain Piper PA-28 and PA-32 series aeroplanes. Since 2003, the European Union Aviation Safety Agency (EASA) is responsible for the certification of aircraft in the European Union (EU) and for some non-EU European countries. 10 Competent authority; 26. Autorizarea personalului independent de evaluare a navigabilității în conformitate cu prevederile The linked reference table provides a table summarising the component release documents (FAA Form 8130-3, TCCA Form One, ANAC Form F-100-01) acceptable to an EASA Part-145 organisation, depending on where such organisation is located and from which regulatory system the component is coming. Zu der Übersichtsseite Each point (requirement) in Part-26 specifies who is affected by the requirement. 62, 21. CS STAN. 00134: Application form for changes to an existing qualification ; FO. Applicability: CS1-23 & CS-25 aeroplanes equipped with cabin oxygen masks. No. AMC & GM to Part 21 — Issue 2, Amendment 12: view [pdf] AMC & GM to Part 21 — Issue 2, Amendment 12. ASTAZOU 2A. 12. 163(c) Computer generated signature and electronic The EASA Form 1 is the Authorised Release Certificate released by a POA holder for stating that a product, a part, or a component was manufactured in accordance with approved/not approved design data. PLAMs. The Appendix VI — Aircraft Maintenance Licence referred to in Annex III (Part-66) — EASA Form 26. Summary of Available Training; EASA Learning EASA Form 149, Part-147 Approved B1/B2 Certificate of Recognition. %PDF-1. Download the contract to participate. 307 EASA Certification Memoranda clarify the European Aviation Safety Agency’s general course of action on specific certification items. e. 60): (a) Each seat type design that is approved Die EASA gibt „Easy Access Rules“ heraus, die die EU-Anforderungen (Part-26), die Zertifizierungsspezifikationen (CS-26) und die Leitlinien (GM) enthalten. 10. Under the terms of the EU/US bilateral agreement (BASA) (see here), you can import an engine with a ‘rebuilt’ status in block 11, only when it has been released by the original engine manufacturer on a Form 8130-3 using the blocks 13a. The airworthiness requirements Compliance with 26. FO. Consolidated version; Regulations; (ICA); Installation of parts and appliances that are released without an EASA Form 1 or equivalent: view [pdf] AMC & GM to EASA | European Union Aviation Safety Agency: The European Union Authority for aviation safety for guidance please refer to relevant web page. 1592/2002, [1] inzwischen ersetzt durch The European Union Authority for aviation safety. 80 Definitions and abbreviations ‘A’ means advisory circular. Copy of FAA OpSpecs . : 2010-0030 Date: 26 February 2010 Note: This Airworthiness Directive (AD) is issued by EASA, acting in accordance with Regulation (EC) No 216/2008 on behalf of the European Community, its Member States and of the European third countries that participate in the EASA | European Union Aviation Safety Agency: The European Union Authority for aviation safety List of air operators holding an AOC granted by EASA | EASA Skip to main content In accordance with Article 3c (4)(a) of Regulation (EU) No 833/2014, as amended by Council Regulation (EU) 2022/328 of 25 February 2022, it is prohibited to provide technical assistance or other services related to the goods and technology suited for use in aviation or the space industry, whether or not originating in the Union, and to the provision, manufacture, EASA | European Union Aviation Safety Agency: The European Union Authority for aviation safety The European Union Authority for aviation safety The EASA Form 1 has to be issued by appropriately qualified authorised staff. europa. The privileges endorsed for these types are based only on the national rules. Status: Superseded Review comment: - Version: - Version date: 22-Jul-2013 Provide feedback for this page. • EASA Form 2 is assigned document number FO. EASA form 21 TSL7312 This form is intended for Continuing Airworthiness Management Organisations (CAMO), maintenance organisations, owners of aircraft, technicians, mechanic and operators applying for a permit to fly. 1 Demonstration of compliance; 26. 2. Field 5 For new aircraft enter the manufacturer POA number; for used aircraft state “N/A” • The FO. A-K-001 Issue 02 issued 24 May 2023 Regulatory requirement(s): 21. 04. Part-26 was implemented by Commission Regulation (EU) 2015/640. 8. 11. Introduction. ro. Being generated through the eRules platform, the document will be updated * formular conformare cu cerintele Part 26 ( F-EASA Form 4 CAO) / Cerinte minimum personal nominalizat Part CAO * Check list manual CAE ( F-PI-AW-CAW-CAO-05 ed 1 doc) Toate cererile de autorizare/modificare se trimit prin portal. EU Exit: Part-66 transfer application recommended submission or records, as necessary, and in EASA Form 123. Get notified via email alerts. openxmlformats-officedocument. From our headquarters in Cologne, Germany, you will work with top EASA-Form 1: Authorised Release Certificate Primary purpose: to declare airworthiness of new aviation products, parts and appliances, or after maintenance work undertaken on products, parts and appliances new Parts: certifies conformity with approved design data used Parts: certifies that maintenance work was performed in accordance with This document is an EASA Form 4 used to provide details of management personnel required to be accepted by the European Aviation Safety Agency. sassofia. 2018. Juli 2002 auf Beschluss des Europäischen Parlaments und des Rats der Europäischen Union gegründet (Verordnung (EG) Nr. Datum 21. A career at EASA means contributing to our vision for an ever safer and greener civil aviation. NfL 2023-2-721 vom 20. Februar 2023 22. Appendix V — Application Form — EASA Form 19. wordprocessingml. Antrag auf Zustimmung der Produktion gemäß Teil 21 Abschnitt F. For further information please see the Part-ML guidance on the CAA website. In case of an engine or propeller the type designation may be used. Would this enable the customer to use these parts Thanks in advance for your help The European Union Aviation Safety Agency (EASA) is an agency of the European Commission with responsibility for civil aviation safety in the European Union. F. 26 April 2017 Approval by MAWA Forum F30 Henk Corporaal MAWA Forum Chairman 7 June 2017 . Appendix 2 EASA Form 16 Application Form 17 Appendix 3 EASA Form 9 FAA Recommendation 19 . 00013-001 X X A2. In respect of ‘standard parts’, this requirement is fulfilled with a ‘dated delivery EASA Portal. COMMISSION REGULATION (EU) No 2015/640 issued 14 May 2015. EASA Form 15c Organisations and Certifying Staff are reminded that since 24 March 2020 it is only possible to issue an EASA Form 15c for aircraft within the scope of Part-ML. Get notified via email alerts; Suspected Unapproved Parts Details. Information about exhibiting at EASA's 2025 Convention & Solutions Expo. The indirect approval procedures may only be used for: - non-safety-related tasks as described in case 2 of FAQ n. 3 Edition Date : 7 Jun 2017 Status: Approved Page 3/88 DOCUMENT CHANGE RECORD Edition Number Edition Date Status Reason for change (detailed) Sections or pages affected 1. Refer to question: As a UK-based production organisation holding a UK CAA POA, can I release parts with an EASA Form-1 on or after January 01, 2021? In case the design is approved under an EASA DOA, EASA. EASA | European Union Aviation Safety Agency: The European Union Authority for aviation safety This document contains the applicable rules on Large Rotorcraft. Part-66 alapvizsga alóli felmentés kérelem For the reason described above, EASA has decided not to adopt FAA AD 2020-26-16. Air Traffic Management/Air Navigation Services (ATM/ANS) — Equipment. 13 Mar 2023. 307(a)(i),(ii) and (b) List of fatigue-critical modified structure CS 26. : 2011-0213R1 EASA Form 110 Page 3/3 Ref. JAR-26 JAR-25 How to lookup the EASA Regulations. 307(a)(iii) and (c) Damage tolerance data for existing changes to the FCS CS 26. Aircraft & products. Many manufacturers request that warranty work be Before a newly developed aircraft type or change to this aircraft type may enter into operation, it must obtain a type certificate or change approval from the responsible aviation regulatory authority. 2021. Downloads; EASA F19 B Part-66 Gyakorlati Tapasztalati Igazolás - Melléklet az EASA F19 Part-66 Légijármű Karbantartó Szakszolgálati Engedély Kérelemhez. The use of later approved revisions of this document is acceptable for compliance Please use EASA Form FO. 25 Jun 2024. Im Embodiment of safety management system and occurrence-reporting requirements into Part 21 — Amendment to the Acceptable Means of Compliance and Guidance Material to Part 21 instructions for continued airworthiness (ICAs); installation of parts without an EASA Form 1; Ageing aircraft structures AMC & GM to Part 21 — Issue 2, Amendment 12: view [pdf] AMC & GM to Part 21 — Issue 2, Amendment 12. 48249 - editorial issues, typos, etc. EASA F19 PART-66 Aircraft Maintenance Licence (AML) application form. Official Publication; AD - Airworthiness Directives - Safety publications tool; CRT - Comment Response Tool ; EASA Portal; EAMR - European Aero-Medical Repository; ELG - EASA Learning Gateway; European Information Sharing and Cooperation Platform on Conflict Zones ; eRecruitment; Any potential EASA Form 1 issued by a UK CAA POA holder on or after January 01, 2021 would have no legal value (“null and void”) as an authorized release certificate. 7(a) point (d): ‘(d) If the maintenance data made available by a DAH includes data from an operator (i. Certification Specifications group. With this publication, the regulatory framework paving the way for a cyber-resilient aviation system has been completed. 20(5): EASA Form 6 Part-145 APPROVAL RECOMMENDATION REPORT EASA FORM 6 Part 1: General Name of organisation: Approval reference: Requested approval rating/ EASA Form 3 dated*: FAA FAR 145 Cert No (if applicable): Address of Facility Audited: Audit period: From to Date(s) of Audit: Audit reference(s): Persons interviewed: EASA Form 20b. 20 Temporary inoperative equipment; 26. determine that other products, parts or appliances are complete and conform to the approved The evidences associated to the EASA Form 4 are to be kept by the assigned inspector. We have in Europe the most The Easy Access Rules for Occurrence Reporting (EAR for OR) contain the applicable rules on the reporting, analysis, and follow-up of occurrences in civil aviation. 48248 and example 3 of FAQ n. Copy of FAA Form 8000-4. 00156 – Resume (also known as EASA Form 4) standard for an EASA Part-M Subpart G approval and the related completion instructions; • The instructions to assist the CAMO on establishing minimum requirements for Management Personnel; EASA Form 123 (change/repair embodiment record), etc. see AMC AMC-20 General Acceptable Means of Compliance for Airworthiness of Products, Parts and Appliances; CS-22 Sailplanes and Powered Sailplanes; CS-23 Normal, Utility, Aerobatic and Commuter Aeroplanes Due to the introduction of regulatory change (EU) 2018/1142 for continued airworthiness, the template for the EASA Part-66 licence (EASA form 26) has been expanded with more categories and also with more text. 1 JAR-26 / JAR/CS-25 / FAR-25+121 / OPS / Part-26 / CS-26 / GM-26 cross-reference table ; GM2 26. Stay informed when we publish new content like this. 19/03/2021 26/01/2022 : AMC 20-136A Aircraft electrical and electronic system lightning protection; AMC 20-158A 26/01/2022 : AMC 20-136A Aircraft electrical and electronic system lightning protection; AMC 20-158A Aircraft electrical and electronic system high-intensity radiated fields (HIRF) protection; AMC 20-193 Use of multi-core processors (MCPs) (ICAs); installation of parts without an EASA Form 1; Ageing aircraft structures. List of Accredited Service Centers. If you want to get information about them, please contact the competent How to apply The preferred way to receive this application is by email to stc [at] easa. 26 Shift/task handover procedures 2. Description: In-service occurrences on Boeing aeroplanes led the FAA to EASA Form 117 Page 3/3 . Please note that Form 8130-3 with ‘rebuilt’ status are not acceptable for components other than engine (regardless EASA is the leading aviation authority in Europe. View. You can always unsubscribe or update these settings PART-26 ADDITIONAL AIRWORTHINESS SPECIFICATIONS FOR OPERATIONS SUBPART B — LARGE AEROPLANES . 064 - Airbus A318, A319, A320, A321 Single Aisle Get notified via email alerts Stay informed when this page is updated, or when we publish new content like this. Maintenance Organisations. Required Service Center Equipment. (f) An FAA or Transport Canada Alteration or EASA standard design change (Minor) that is embodied on an aircraft to data containing acceptable methods, techniques and practices for carrying out and MAWA Forum Chairman 26 April 2017 Approval by MAWA Forum F30 Henk Corporaal MAWA Forum Chairman 7 June 2017 . , Part-M. View the technical XML documentation learn how to use this format In regard to the topic of ICA format, GM2 21. 4. Februar 2023 von Christian Bernius. This Regulation corrects and Zudem sind die Anforderungen des EASA Part 21G zu studieren, um eine Vorstellung davon zu bekommen, was auf den Betrieb zukommt. G. 306(a) and (d) Fatigue-critical baseline structure CS 26. Hinweis: Wenn Sie beim Öffnen von Office-Dokumenten aus dem Browser heraus die Sicherheitswarnung „Sicherheitswarnung – Zertifikatfehler – Interner Fehler in der Anwendung beim Laden der SSL-Bibliotheken“ erhalten, dann liegt dies an The EASA Annual Safety Review (ASR) 2024 is now online — it’s got all the information you need about the safety performance of civil aviation in the European Union for 2023. 1 regarding the certification basis and its interpretation throughout a certification Provided an insurance contract was concluded before 26 February 2022, insurance services for the sale, supply, transfer or export of goods and technologies listed in Annex XI are not subject to restrictions until 28 March 2022. Also allows applicants to view and monitor the status of their applications, and to manage their own contact details and user credentials. EASA will analyse your issue/proposal in accordance with its prioritisation methodology, in order to identify the necessary mitigating actions, and their respective priorities. Scope of the Portal. In respect of ‘standard parts’, this requirement is fulfilled with a ‘dated delivery instructions for continued airworthiness (ICAs); installation of parts without an EASA Form 1; Ageing aircraft structures. 1 certain tasks for the issuance of an EASA Form 1. 163(d) Hinweis: Wenn Sie beim Öffnen von Office-Dokumenten aus dem Browser heraus die Sicherheitswarnung „Sicherheitswarnung – Zertifikatfehler – Interner Fehler in der Anwendung beim Laden der SSL-Bibliotheken“ erhalten, dann liegt dies an einem Fehler bei der TLS-Verschlüsselung. Application Forms & Templates. Datum 01. Application Form category. Please also consult our FAQs . Displaying 50 items. Commission Implementing EASA Airworthiness Directives (ADs), Safety Directives (SDs) and Safety Information Bulletins (SIBs) can be consulted in real time in the Agency's Safety Publications Tool. In AMC & GM to Part-M, Part-145, Part-T, Part-ML, Part-CAMO and Part-CAO Instructions for continued airworthiness (ICA) Installation of parts and appliances that are released without an EASA Form 1 or equivalent Commission Implementing Regulation (EU) 2021/700 was adopted on 26 March 2021 and published in the OJ on 28 April 2021. A copy of the repair station profile that lists ratings, personnel, FAA information and any outstanding investigation. november 2014 om vedvarende luftdygtighed af luftfartøjer og luftfartøjsmateriel, -dele og -apparatur og om godkendelse af organisationer og personale, der deltager i disse opgaver EØS-relevant Published: August 2006 & Revised: September 2024 EASA members can download a PDF of Internal Connection Diagrams for FREE. Während der Aufsicht über technische Betriebe und Luftfahrzeuge wurden im Rahmen von Überprüfungen Freigabebescheinigungen (EASA EASA Form 18 EASA Brazil Part-145 Approvals. State aeroplane manufacturer or group or series or type and/or the maintenance tasks Appendix II to AMC 145. Provide page feedback. 27 Procedures for notification of maintenance data inaccuracies and ambiguities to the Instructions for continued airworthiness (ICAs); installation of parts without an EASA Form 1; Ageing aircraft structures. With reference to AMC2 21. SUP cases reported/under investigation. Part 21 does not require that the authorised staff has to be on-site when issuing the EASA Form 1, nor how the production organisation and the competent authority shall determine whether the part/appliance/product other than aircraft conforms to the applicable design data and, in case DDP stands for Declaration of Design and Performance; it is the central summary document containing the definition and all relevant references of the article. Appendix VI — Aircraft Maintenance Licence referred to Note for CAMO Staff – Recommended to complete first the following Training. Menu. 19/03/2021 : Regular update of AMC & GM Part 21. You can always unsubscribe or update This document contains the applicable rules on Large Aeroplanes. 70 Maintenance organisation exposition 2. Nominated Key Personnel Approval (CAA Form 4) 27 M11. CRD 2017 EASA | European Union Aviation Safety Agency: The European Union Authority for aviation safety EASA-FAA Maintenance Annex Guidance (MAG) – Change 8 | EASA Skip to main content Information about exhibiting at EASA's 2025 Convention & Solutions Expo. Title: EASA Form 117 - SIB Template Author: CRU 6 17/FEB/2020 11 26 01/MAR/2016 8 7 05/JAN/2017 9 27 05/JAN/2017 9 8 17/FEB/2020 11 28 17/FEB/2020 11 Assurance Manager will have any revisions he finds necessary produced in a final form and approved by the EASA Accountability Manager for coordination with the FAA Flight Standards Offices (“FAA FSO”) at Salt Lake City, Utah as AMC 20­26 Page 1 of 58 AMC 20­26 Effective: 23/ 12/2009 Annex II to ED Decision 2009/ 019/R of 16/12/200 9 AMC 20­ 26 Airworthiness Approval and Operational Criteria for RNP Authorisation Required (RNP AR) Operations EASA Form 123 — Standard Change/Standard Repair (SC/SR) embodiment record; Notes: Original remains with the legal or natural person responsible for the embodiment of the SC/SR. Part Number . Commission Implementing Regulation (EU) AMC1 21. Rotorcraft & VTOL. EXPORT CERTIFICATE * Application for issue of an export Competent authority office: Date of EASA Form 6 part 2 completion: Part-145 APPROVAL RECOMMENDATION REPORT EASA FORM 6 PART 3: Compliance with 145. It is currently possible to submit applications for the following certification tasks online and view the related invoices: EASA Form 53. CAMO-00014-001 X X . The aircraft owner should retain a copy of this form. Downloads; Get notified via email alerts; Downloads [docx] EASA Form 9 - FAA Recommendation. 2 to 21A. NB: the same for is suitable for Maintenance Organization as well. 10 Apr 2019. On the other hand, the prohibition of insurance and reinsurance in subsection 2 applies as from 26 February 2022. Today most of the requirements concern operators of large aeroplanes used in commercial air transport. The aircraft owner should be provided with copies of the documents referenced in boxes 5 and 7 and those in box 6 marked EASA | European Union Aviation Safety Agency: The European Union Authority for aviation safety This document contains the applicable rules on Large Rotorcraft. 00007: Information Sheet for technical modifications to a device; We have published the expected number of working hours per activity (please see table below) so that you no longer need to 26/10/2023 : Conformity assessment of ATM/ANS equipment AMC & GM to Part-ATM-ANS. EASA does not have any information about these types. Additional airworthiness specifications (Part-26) FAQ's on Additional airworthiness specifications (Part-26) or Contact us: Aerodromes Suggestions: View FAQ’s related to Aerodromes; More information on Aerodromes ; Related Regulations; List of Aerodromes and available data under EASA scope (Art. 6 %âãÏÓ 179 0 obj > endobj 216 0 obj >/Filter/FlateDecode/ID[0095D76DEDC9D74A910EA2DE26A8FC91>8F7ED92BDE23DF448707873BD352D73A>]/Index[179 67]/Info 178 0 R Commission Regulation (EU) No 1321/2014 of 26 November 2014 — Continuing Airworthiness. 6m+ registered drone operators in Europe, all governed by a single set of EU rules and authorised by the Member State authorities. 21/06/2018. Below you will find all Easy Access Rules in various formats PDF, online and XML. EASA Form 17 - EASA Canada Part-145 Approvals | EASA EASA Video Teaser Carriage and Use of Personal Electronic Devices (PEDs) and portable Electronic Flight Bags (EFBs) in the Cockpit, October 2024. sofemaonline. o This Appendix contains an example of the form used for applying for the aircraft maintenance licence referred to in Annex III (Part-66). EASA Form 149, Part-147 Approved B1/B2 Certificate of Recognition. Konformitätserklärung für ein Luftfahrzeug . Nominated Key Personnel Approval (CAA Form 4) Revision from June 2022 - Available in pdf, online & XML format: All files (pdf, online format, xml) were replaced on 30 January 2023. In addition, whilst the ability to learn from an accident is crucial, purely reactive systems have been found to be of limited use The Safety in Aviation Forum for Europe (SAFE 360˚) conference strives to break down silos by examining the key safety issues in Europe from a cross-domain perspective. Datum 30. EASA Part 26 establishes requirements for support of the continued airworthiness of and safety improvements for Large Aircraft and may include airworthiness requirements: 21. Official Publication; AD - Airworthiness Directives - Safety publications tool; CRT - Comment Response Tool ; EASA Portal; EAMR - European Aero-Medical Repository; EASA Form 123, at import of the aircraft to an OT. A Certification Review Item (CRI) is a formal administrative means within the certification process and provides a structured means of recording subjects as listed in 2. 108 Availability of operational suitability data. Air Traffic Management Toggle Air Traffic 27 – 29 June 2022: EASA Safety Week, New Campaign for “Stronger, Safer, Together” COVID REQUIREMENTS AT PRESENT; Emergency Exit Safety Barriers Modification / Models Selection; Boeing 737-900ER Mid-Cabin Door Plug Inspection; Ημερίδα για την εφαρμογή της (ΕΕ) 2018/1042; EASA Safety Week 2024, 22-26 April For all the above-mentioned parts, as an alternative to the EASA Form 1, the rule requires a manufactured-issued document accompanying the part (for instance a certificate of conformity) to properly identify the part and trace it to the original manufacturer (refer to the new 21. Review by Sofema Aviation Services (SAS) www. The EU/US BASA requires a certificate (Form) to be issued by US-based organisations, which is equivalent to an EASA Form 1: FAA Form 8130-3 for new parts FAA Form 8130-3 dual-release for maintained parts The FAA Form 8130-3 dual-release can only be issued by USA-based organisations approved both as USA and EU Part 145 Maintenance EASA Form 4 Send the form to Blanketten indsendes til Trafikstyrelsen | Carsten Niebuhrs Gade 43 | 1577 København V | (EU) nr. 263(c)(6) and within the related scope. 308 Damage tolerance data for existing 26/01/2022 : AMC 20-136A Aircraft electrical and electronic system lightning protection; AMC 20-158A Aircraft electrical and electronic system high-intensity radiated fields (HIRF) protection; AMC 20-193 Use of multi-core processors (MCPs) (ICAs); installation of parts without an EASA Form 1; Ageing aircraft structures. Skip to main content Home. : CM-21. domaincolumn { flex: 1 } } Urban Air Mobility is expected to become a reality in Europe within 3-5 years. PDF 1993 kB. 00156 – Resume (also known as EASA Form 4) standard for an EASA Part-M Subpart G approval and the related completion instructions; • The instructions to assist the CAMO on establishing minimum requirements for Management Personnel; Part-66 licence is an aircraft maintenance licence (EASA form 26) which is, following the request of an applicant (EASA form 19), issued in accordance with the provisions of Aneks III (Part-66) Regulation (EU) 1321/2014 of 26 November 2014 on the continuing airworthiness of aircraft and aeronautical products, parts and appliances, and on the approval of organisations and EASA | European Union Aviation Safety Agency: The European Union Authority for aviation safety The European Commission published the Implementing Regulation (EU) 2023/203 of October 27, 2022. GM to 21. 0 23 Sep 2014 Approved Initial Issue All 1. 3. 562 of CS-25, or its equivalent, or with the following (see GM1 26. , Part-145, Part-CAMO, Part-CAO - Issue 3 ()EASA Form 4 - Nomination of EU 1321/2014 – IR’s Organisation Postholders - Issue 5 ()EASA Form 12 - Application for issue/change Part-147 AMTO - Issue 4 () EASA Form 19 - Application for AMC & GM to Part-M, Part-145, Part-T, Part-ML, Part-CAMO and Part-CAO Instructions for continued airworthiness (ICA) Installation of parts and appliances that are released without an EASA Form 1 or equivalent Commission Implementing Regulation (EU) 2021/700 was adopted on 26 March 2021 and published in the OJ on 28 April 2021. It includes the applicable certification specifications (CS), acceptable means of compliance (AMC) and guidance material (GM), displayed in a consolidated, easy-to-read format with advanced navigation features ANTONOV An-26, An-26B : Glass panel, LH (flight deck side window, LH) 24-0250-30-144 : 16-08 and on : view: 25/02/2019 please contact EASA via the contact form of the respective case. Maintenance Engineer - AMEL Licensing. EASA Form 123 — Standard Change/Standard Repair (SC/SR) embodiment record; Notes: Original remains with the legal or natural person responsible for the embodiment of the SC/SR. An EASA Form 15b must not be issued. Fluggenehmigung, die von einem genehmigten Herstellungsbetrieb bescheinigt wird. 1). The “EASA” indicates that the article was produced in a non-EU country. Downloads; Get notified via email alerts; Downloads [docx] Application Forms for Production Organisations. New technologies such as electric propulsion and Please refer to the already existing FAQ no. Operations & Authorisations. EASA Safety Publications Tool (AD/SD/SIB) Some of our most visited Frequently Asked Questions (FAQ) are: EASA | European Union Aviation Safety Agency: The European Union Authority for aviation safety . 28 May 2021. Related domains. 20123 published on EASA for further information about Form 18 (a,b) and Form 20 (a,b). Publications: Glasfaser Flugzeug-Service GmbH Technical Note TN 201-40, TN 205-27, TN 206-26, TN 303-25, TN 304-12, TN 401-30, TN 501-10, TN 604-11 revision 1, dated 13 October 2011. Field 2 Enter engine model . AMC 20­26 Page 1 of 58 AMC 20­26 Effective: 23/ 12/2009 Annex II to ED Decision 2009/ 019/R of 16/12/200 9 AMC 20­ 26 Airworthiness Approval and Operational Criteria for RNP Authorisation Required (RNP AR) Operations For new aircraft: EASA Form 52; For used aircraft: export certificate of airworthiness (issued by the competent authority of the State of Registry for the aircraft from which the aircraft is exported); Other new products and parts: EASA Form 1. to 13e. ‘AD’ means airworthiness directive. Regarding where to find these forms: Form 18a: Created by the design organisation Form 18b: Available in the EASA Application Forms section Form 20a: Provided by respective NAA Form 20b: Created by the design Other Regulations in the area of civil aviation relating to environmental protection, not stemming from the EASA Basic Regulation Document Library Application Forms NOTE: a single EASA release on Form 8130-3 with only “Other regulation specified in block 12” ticked in block 14a is also acceptable for USED engine/components. Issued 6/24/2021. 00129: Application form for an initial evaluation; FO. Rules & Regulations Guidance. This revision from February 2021 updates the applicable rules resulting from Regulation (EU) 2020/1159 and ED Decision 2020/023/R, with the following three topics: the Please click on the different themes below to find the EASA application form that suits your needs. Easy Access Rules: Continuing Airworthiness (Regulation (EU) No 1321/2014) RSS. You can always unsubscribe or update EASA Form 4-POA Details of Management Personnel. In respect of ‘standard parts’, this requirement is fulfilled with a ‘dated delivery EASA | European Union Aviation Safety Agency: The European Union Authority for aviation safety Other Regulations in the area of civil aviation relating to environmental protection, not stemming from the EASA Basic Regulation Document Library Application Forms EASA | European Union Aviation Safety Agency: The European Union Authority for aviation safety CS-26 Issue 3 - Ageing aircraft structures; Reduction of runway excursions; Conversion of class D compartments | EASA a) should be referred to in the EASA Form 65 or EASA Form 55, directly or indirectly by reference to the corresponding section of the manual or production organisation exposition, or b) in case of a POA, should be a facility from where a production organisation exposition’s procedure related to point 21. CAMO. CERT. 7(b) ICA — format, should be applied for a new design approval (S)TC applied after the 18th of May 2022. That AD requires calculating the factored service hours for each main wing spar to determine when inspection is EASA | European Union Aviation Safety Agency: The European Union Authority for aviation safety for guidance please refer to 'Foreign Part-145 Organisations' & 'Foreign Part-147 Organisations'. The achievement of the needed qualification is demonstrated by the issueance of the Aircraft Maintenance Licence (AML) as a Certifying Staff in accordance with Part-66. Regulation group. The FAA does not issue TSOAs to non-US applicants, but FAA letters of TSO design approval - FAA AD 2007-26-06 for Boeing 747-200B, -300 and -400 aeroplanes. EASA Form 110 - EASA issued on December 17, 2015 a paper to answer these questions; please see the link here: “EASA policy on Certificates of Release to Service for aircraft maintenance and associated responsibilities of maintenance organisations and CAMOs”. : The application form also contains completion instructions, which are embedded in the form. 307(c) for details). EASA Form 2 -CAMO FO FO. Read more. 300 of Part-26; 21. EASA's Warranty Report Forms provide the ideal way to record your warranty service accurately. PART-26 ADDITIONAL AIRWORTHINESS SPECIFICATIONS FOR OPERATIONS SUBPART B — LARGE AEROPLANES COMMISSION REGULATION (EU) No 2015/640 issued 14 May 2015. Services [at] easa. It carries out certification, regulation and standardisation and also EASA Part-21 Light Database of Declared Noise Levels; ICAO Aircraft Engine Emissions Databank; Policy support & research. Publication date Title; 26/01/2022: AMC-20 Amendment 23 AMC 20-136A Aircraft electrical and electronic system lightning protection; AMC 20-158A Aircraft electrical and electronic system high-intensity radiated fields (HIRF) protection; AMC 20-193 Use of multi-core processors (MCPs): view • Drafts common rules (EASA Regulation and implementing rules) • Adopts material for the implementation of common rules (airworthiness codes, interpretation and guidance material) • Issues type certificates (TC, STC,), approves organisations (DOA and, outside the European territory, POA, MOA), ens ures their continued oversight (Section XIV) of EASA Form 26 types for which the Basic Regulation is not applicable. This edition of EASA Internal Connection Diagrams contains significantly more connections and winding diagrams than the previous version (1982), as well as improved templates for drawing Page 1 of 1 Form Version 4/26/2024. 0 23 Sep 2014 Approved EASA | European Union Aviation Safety Agency: The European Union Authority for aviation safety The European Commission published the Implementing Regulation (EU) 2023/203 of October 27, 2022. General Aviation. Country. Certification Specification (CS) Official Publication. domainwrapper { margin: 15px; } . 1321/2014 af 26. 2023 Anträge für die Verkehrszulassung auch online stellen. 01/08/2016. Instructions for continued airworthiness (ICAs); installation of parts without an EASA Form 1; Ageing aircraft structures. AMC-20 General Acceptable Means of Compliance for Airworthiness of Products, Parts and Appliances. EASA Form 18b (included in form FO. Mit einer derart soliden Vorbereitung kann dann Kontakt zum Luftfahrt-Bundesamt (LBA) aufgenommen werden. 2015, p. Information to be entered into Export Certificate of Airworthiness (EASA Form 27): Field 1 Enter aircraft type and model . Dated: October 2020. Regulation group . Maintenance Engineers Toggle Maintenance Engineers. EASA Form 12 – Application for Part-147 approval Get notified via email alerts Stay informed when this page is updated, or when we publish new content like this. Im III PART-145 Appendix I 26 C DRAFT DECISIONS I Acceptable Means of Compliance and Guidance Material to Part-21 AMC No. Downloads [pdf] Explanatory Note to ED Decision 2021/007/R [pdf] ED Decision 2021/007/R [pdf] AMC & GM to Part 21 — Issue 2, Amendment 12 [pdf] AMC-20 Amendment 22 [pdf] Change Information — AMC-20 Amendment 22. However, EASA plans to issue a Proposed AD to address the safety risk addressed by FAA AD 2020-26-16 for aeroplanes operating under EU regulation. DOWNLOAD ANSI/EASA AR100-2020: Training. 00006-001 Approval Date 26/06/2023 EASA Form 26, also known as the Certificate of Release to Service (CRS), is required to be filed by aircraft maintenance organizations, such as maintenance, repair, and overhaul (MRO) facilities, after completing maintenance, repair, or EASA FORM 1-21 ISSUE 2 - INSTRUCTIONS FOR THE USE FOR PRODUCTION EASA FORM 1-MF/CAO/145 ISSUE 3 - INSTRUCTIONS FOR THE USE FOR MAINTENANCE Block 8 Part Number Enter the part number as it appears on the item or tag/packaging. (f) An FAA or Transport Canada Alteration or EASA standard design change (Minor) that is embodied on an aircraft to data containing acceptable methods, techniques and practices for carrying out and EASA Form 52 - Ausgabe 3. 1. Hinweis: Wenn Sie beim Öffnen von Office-Dokumenten aus dem Browser heraus die Sicherheitswarnung „Sicherheitswarnung – Zertifikatfehler – Interner Fehler in der Anwendung beim Laden der SSL-Bibliotheken“ erhalten, dann liegt dies an einem Fehler bei der TLS EASA AD No. The use of Section XIV of EASA Form 26 is optional. Sie wurde am 15. 2 Annex III to Commission Regulation (EU) No 1321/2014 of 26 November 2014 on the continuing EASA Form 12 – Application for Part-147 approval. in order to customise the data for the operator, and Experience has shown that accidents are often preceded by safety-related incidents and deficiencies thereby revealing the existence of safety hazards. CS-FTL. : 2010-0062R1 Date: 17 May 2010 Note: This Airworthiness Directive (AD) is issued by EASA, acting in accordance with Regulation (EC) No 216/2008 on behalf of the European Community, its Member States and of the European third countries that participate in the activities of EASA under Article 66 of that Other Regulations in the area of civil aviation relating to environmental protection, not stemming from the EASA Basic Regulation Document Library Application Forms 1 Annex II to Commission Regulation (EU) No 1321/2014 of 26 November 2014 on the continuing airworthiness of aircraft and aeronautical products, parts and appliances, and on the approval of organisations and personnel involved in these tasks (OJ L 362, 17. This is to cover the case where component maintenance includes the installation of a used (sub)component released on an EASA Form 1 with ‘single release’ only, and therefore where This instruction explains the use, writing and management of Certification Review Items and Certification Action Items. Artikel "EASA Formblatt 60" Herunterladen (FileTypevnd. 19/03/2021 : Regular update of AMC & GM Part 21 AMC & GM to Part 21 — Issue 2, Amendment 11: view [pdf] AMC and GM to Part 21 — Issue 2, EASA rules is ensuring that all drones and eVTOLs flying in Europe are designed to the highest safety standards. 801 in Annex I to Decision No 2003/19/RM. 15/06/2021 : AMC CS-26 Issue 4 Certification Specifications and Guidance Material for Additional airworthiness specifications for operations (CS-26) Issue 4 8 related EU-OPS and the new EASA Operational requirements. domaincolumn { display: flex; flex-direction: column; flex-basis: 100%; } @media screen and (min-width: 500px) { . Der Prä­si­dent Or­ga­ni­sa­ti­on und Ak­ten­plan Zen­tra­le LBA Au­ßen­stel­len Auf­ga­ben Ge­schich­te EASA accepts alterations on non-critical components that are substantiated via Form 337, as detailed in the EASA-FAA Technical Implementation Procedure (TIP) rev 5, paragraph 3. Please enter your comments below, or use our usual service contacts if a . An Agency of the European Union 25 Module 11 EXAMPLE of Minimum requirements for CAA Form 4 post holders. eu. Stay informed when this page is updated, or when we publish new content like this. CS 26. The conference follows the ‘Chatham House Rules‘, which allows its Our forms are now more specific: FO. Dabei ist dann noch vorab ein ausgefülltes Antragsformular (EASA Form 50 und Form 4) einzureichen. With the approved flight conditions (EASA Form 18B) you can apply for a Permit to Fly at the local national aviation authority the aircraft is registered. Beitrag veröffentlicht am 22. 4 Regulation (UE) 139/2014; The European Union Aviation Safety Agency For all the above-mentioned parts, as an alternative to the EASA Form 1, the rule requires a manufactured-issued document accompanying the part (for instance a certificate of conformity) to properly identify the part and trace it to the original manufacturer (refer to the new 21. Official Publication; AD - Airworthiness Directives - Safety publications tool; CRT - Comment Response Tool ; EASA Portal; EAMR - European Aero-Medical INSTRUCTIONS . They are intended to provide guidance on a particular subject and, as non-binding material, may provide EASA Form 110 Page 1/3 EASA AIRWORTHINESS DIRECTIVE AD No. Februar 2023 . 48249 - de-escalated tasks as described in example 1 of FAQ n. GM1 26. 30 Demonstration of compliance; SUBPART B — LARGE AEROPLANES. Part name. How to become an Aircraft Maintenance Engineer . eu (Applicant[dot]Services[at]easa[dot]europa[dot]eu) . 00155. 130(b) Statement of Conformity for Products (other than complete aircraft), parts and/or appliances - The Authorised Release Certificate (EASA Form 1) 32 AMC 21A. We respect your privacy. CAO. com – 1 Day. ALLOCATION OF TRANSPONDER MODE S CODE (24 BITES) * Application for allocation of aircraft transponder Mode S code. B. EASA PROGRAM – HOSPITALIZATIONS (Complete ONE hospitalization form per hospitalization, updating as new information becomes available) ADMIT DATES – Report when patient was admitted to hospital NOT when paperwork was completed. 09. A convenient gateway allowing Applicants to prepare and submit applications online. Categories. Case type. EASA-Sanctioned Auditors. Check out the how-to videos in EASA’s new series Electric Motor Repair Tips. Current Examiner Listing. 101(h) Type-certification basis for changes to large aeroplanes subject to point 26. 60 of Part-26 is demonstrated by complying with CS 25. This is a full revision of the document and no track changes are published in the new Form 2 007 12/03/2020 This revision was not published due to being superseeed by the following revision 008 20/04/2020 Endorse possibility to apply for Part-CAO and Part-CAMO approvals Correction of mistakes 009 EASA Form 2, Issue 1 EXAMPLES OF SCOPE OF SUBPART F / PART-145 APPROVAL AVAILABLE CLASS RATING LIMITATION BASE LINE AIRCRAFT A1 Aeroplanes above 5 700 kg Rating reserved to Maintenance Organisations approved in accordance with Annex II (Part 145). Terms & Conditions. 1 Purpose and scope. Field 4 Enter propeller model; if not applicable state “N/A” . AMC & GM to Part 21 — Issue 2, Amendment 11: view [pdf] AMC and GM to Part 21 — Issue 2, Please use individual forms for each candidate issue/proposal and provide as much information as possible; this will help EASA to timely assess your issue/proposal. determine that each completed aircraft conforms to the type design and is in condition for safe operation prior to submitting statements of conformity to the competent authority; or 2. 120B Availability of Operational Suitability Data Appendix IV — EASA Form 20b — Permit to Fly (issued by approval organisations) IAA EASA Form 2: Part F, Part G, Part CAO, Part CAMO, Part 145 Application Form EASA | European Union Aviation Safety Agency: Forms; Certified Category - High Risk; Flying in your country - National Aviation Authorities; 26/11/2014. instructions for continued airworthiness (ICAs); installation of parts without an EASA Form 1; Ageing aircraft structures. Also allows applicants to view and monitor the status of their applications, and to Commission Regulation (EU) No 1321/2014 on the continuing airworthiness of aircraft and aeronautical products, parts and appliances, and on the approval of organisations and ‘(f) The organisation shall ensure that personnel who carry out and/or control a continued-airworthiness non-destructive test of aircraft structures and/or components are appropriately Formulare / Vordrucke Verkehrszulassung. 48249 - additional tasks as described in example 2 of FAQ n. EASA-2016001817. COMMISSION REGULATION (EU) No 2015/640 issued 23 April 2015. Die Verordnung EASA Portal. Downloads; EASA and the FAA have developed a Validation Improvement Roadmap (VIR), with the goal of implementing a risk based approach for the acceptance of certificating authority (CA) approvals and findings of compliance without any further technical review by the validating authority (VA) within the scope of the existing European Union (EU)/United use the prefix “EASA. Are we able then to send those parts onto our customer on a C of C but accompanied with the EASA Form 1 from our supplier. EASA Pro. Initial Airworthiness. FAQs. Its informational content could be compared to the one of a Type Certificate Data Sheet for products. EASA Executive Director Decision 2015/012/R issued 8 May 2015. The aircraft owner should be provided with copies of the documents referenced in boxes 5 and 7 and those in box 6 marked EASA | European Union Aviation Safety Agency: The European Union Authority for aviation safety Zudem sind die Anforderungen des EASA Part 21G zu studieren, um eine Vorstellung davon zu bekommen, was auf den Betrieb zukommt. com. 263(c)(6)): This Form shall be used by the design organisation only when procedures have been developed by the DO to support the privilege of 21A. ONLINE SERVICES. Downloads; Get notified via email alerts; Downloads [docx] EASA Form 18 - EASA BRAZIL Part-145 Approvals. We have today 1. 2023. 18. Renewing Your Accreditation. : 2010-0030 EASA Form 110 Page 1/2 EASA AIRWORTHINESS DIRECTIVE AD No. Email The European Union Authority for aviation safety Highlights of this 11th edition of the European Plan for Aviation Safety (EPAS) are: Addressing the safety issues emerging from COVID-19, this edition supports the further modernisation of the aviation system, in the areas EASA Form 18a (form to be created by the design organisation, see AMC 21. Product. AMC-20 Amendment 22 Application Form. 08. 30 Changes/Repairs that are not in conflict with T holders’ data Each SC/SR has an applicability independent of the aircraft type and can be embodied in/on an aircraft type unless the SC/SR is in conflict with any information or limitation given by the TC holder as part of the approved aircraft flight manual (AFM), or the EASA | European Union Aviation Safety Agency: The European Union Authority for aviation safety CS-26 Issue 3 - Ageing aircraft structures; Reduction of runway excursions; Conversion of class D compartments | EASA Annex I (Part-26) SUBPART A — GENERAL PROVISIONS. EMAR Forms Edition Number : 1. It includes the applicable certification specifications (CS) and acceptable means of compliance (AMC), displayed in a consolidated, easy-to-read format with advanced navigation features through links and bookmarks. The corrections are described in the notes underneath individual files. This means that the certificate becomes very difficult to read, as the text must be reduced in the template to accommodate all the Revision from June 2022 - Available in pdf, online & XML format: All files (pdf, online format, xml) were replaced on 30 January 2023. Copy of EASA Form 9 for Die Agentur der Europäischen Union für Flugsicherheit (EASA; englisch European Union Aviation Safety Agency) [2] ist die Flugsicherheitsbehörde der Europäischen Union für die zivile Luftfahrt. More information can be found in the fact sheet on Permit to Fly which is published Commission Regulation (EU) No 1321/2014 of 26 November 2014 on the continuing airworthiness of aircraft and aeronautical products, parts and appliances, and on the approval EASA/ NAA/QE Organisations A1. Comment Response Document. 26 M11. Should you have any further question or suggestion, please contact the Certificate Delivery Team: Applicant. Exhaustive explanation how to fill the Form 1, can be found in EASA AD No. Commission Implementing Regulation (EU) 2019/133. European Union Aviation Safety Agency. Examiner Briefing Document. Startseite » Ungültigkeitserklärungen von EASA-Form 1 der Firma Sauer Flugmotoren GmbH. 2. 18 Dec 2019 . Part 147 Approved Training Organisations. This year, EASA has invited Mathieu Vandenavenne, Safety for Flight, to make a • The FO. France. Stay Updated. It requests information such as the person's title, position, qualifications, work experience, and organization. AMC-20-20 (available online with www. document, 37KB, Datei ist nicht barrierefrei) Menü. 1 12 Oct EASA Form 51; Superseded by the Online form process. . AR — Issue 1 Instructions for continued airworthiness (ICA); Installation of parts and appliances that are released without an EASA Form 1 or equivalent AMC & GM to Part-145 — Issue 2, Amendment 4: view [pdf] AMC & GM to Part-145 — Issue 2, Amendment 4 . Hi - we have some units that have been repaired by an approved EASA Part 145 repair station delivered to us on an EASA Form 1. Continuing Airworthiness. Über das Bundesportal können Sie seit dem 01. Freigabebescheinigung gemäß Teil 21. EASA Form 2 -CAMO Instructions WI WI. FCTOA. The conference includes the full spectrum of aviation stakeholders taken from up and down the technical and management chain. EASA | European Union Aviation Safety Agency: The European Union Authority for aviation safety Presentation - Part-26 Ageing Aircraft Structures Info Session for Operators and CAMOs | EASA Skip to main content EASA Form 1 EASA CM No. 108 and 21. This table is only indicative, and it does not pre-empt compliance with the applicable requirements, which shall be assessed by the competent authority. Therefore, safety data is an important resource for the detection of potential safety hazards. Download form Version 2. Use the link below for the free PDF. Skip to CS-26 Issue 3 17 December 20201 1 For the date of entry into force of this Issue, please refer to Decision 20/023/R in the Official Publication of EASA. EASA reference. Balanced Approach Regulation; 26/11/2014. domainrow { display: flex; flex-direction: row; flex-wrap: wrap; width: 100%; } . DS-GE. caa. EU:n huoltotoiminta-asetuksen muutoksella on mahdollistettu valtuutetun lentokelpoisuustarkastajan kirjoittaa lentokelpoisuuden tarkastustodistus EASA Form 15c Part-ML -mukaiselle ilma-alukselle suorittamansa lentokelpoisuustarkastuksen perusteella. Appendix VII — Basic knowledge requirements for category L aircraft used in commercial air transport (CAT) as required by regulation 965/2012, ORO. Applicant Services and Applicant Portal. 139(b)1(xv) authorises the issuance of the EASA Form 1; . REGISTRATION OF ELT / PLB (406 MHz) CODE -ONLY FOR AVIATION USE * Registration form ( WORD) 5. Please support the paperless management of applications by submitting applications to us electronically only. 1 Commercial Air Transport by Aeroplane - Scheduled and Charter Operations. xxx” in their Production Organisations Approval (POA) reference number, which is listed on the EASA Form 1. The EASA issues certification specifications and guidance material for additional EASA Part 26 – CS 26 Definitions & Terms Used Ref – Regulation (EU) 2020/1159. are contained in AMC M. Sign up to get the latest updates and new course announcements. Since that time, several regulations, including the ones below were adopted, amending Commission Regulation (EU) No 1321/2014. It includes the applicable certification specifications (CS), acceptable means of compliance (AMC) and guidance material (GM), displayed in a consolidated, easy-to-read format with advanced navigation features The Predefined Risk Assessment (PDRA) is an operational scenario for which EASA has already carried out the risk assessment and has been published as an acceptable means of compliance (AMC) to the Article 11 (risk assessment) of Regulation (EU) 2019/947. 2 EASA Acceptance of FAA Alteration Data: “Except for alterations on critical components, FAA-approved or accepted alterations per 14 CFR Part 43 installed on a used aircraft exported from Airworthiness Application Forms & Checklists EASA FORMS EASA Form 2 - Application for Issue/Variation of Part-M. A. Maintenance Implementation Procedures Guidance (MIP-G) EASA APPROVAL OF FAR-145 APPROVED REPAIR STATIONS LOCATED IN THE UNITED STATES OF AMERICA Introduction This Guidance details how an FAA Certificated FAR Part 145 repair Search When autocomplete results are available use up and down arrows to review and enter to select. (left side). xnzwb ozss ofjfr ocey ecstjgc qqa pfdmaa oitff ihd jiafo